Service area · Tallahassee, FL
Office and commercial floors, polished concrete, garage floors and metallic epoxy for homes and businesses across Tallahassee and Leon County.
Solid color floors run about $5 to $8 per square foot, commercial floors $5 to $12, polished concrete $3 to $12, flake garage floors $6 to $10, and a standard two-car garage starts around $2,500, all estimated. As the state capital, Tallahassee has a large base of offices, commercial buildings and public-facing spaces, where floors have to look clean, handle daily foot traffic and be easy to maintain. Polished concrete and solid color epoxy are common choices, and they can be installed in sections, after hours, so the building stays open. Homes from Midtown to Killearn bring garages and, now and then, living spaces that want a statement floor in metallic epoxy. Tallahassee also has the coldest winters of any city we serve, and temperature is one of the variables that decide how fast a coating cures, so in winter we plan the schedule and the return to service around it.
Solid color epoxy and polished concrete for offices and shops, quartz for kitchens and wet areas, flake systems for garages and metallic epoxy for living spaces.
One uniform color, high gloss, no pattern. The cleanest look for showrooms, corridors and any space where the floor should stay quiet.
Vinyl flakes broadcast into the wet resin, then sealed. Hides dust and tire marks better than any solid color — the usual pick for garages. A heavier broadcast gives a full, granite-like texture with more grip, which is what holds up around pools and service areas.
Mechanically refining the slab you already have through progressive diamond grits. No coating on top — the finish is the concrete itself.
Metallic pigments moved through the resin while it cures, so every floor comes out with its own veining. No two are the same — this is the one people ask us for by name.
Colored quartz aggregate in a resin matrix. The toughest decorative option we install — built for kitchens, labs and wash-down areas.
A penetrating or film-forming sealer against oil, salt and water. The cheapest thing you can do to make a slab last longer.
$6 – $10
per square foot installed, most flake floors
A standard two-car garage starts around $2,500. Solid colour runs $5 to $8 and metallic $8 to $15 per square foot. These are market estimates, not fixed rates: slab condition, preparation, moisture, repairs, the system and access decide the final number — and we would rather you know the range before you call than after.
What moves the number
The numbers, side by side
| Flake epoxy (garages, patios) | $6 – $10 per square foot, estimated |
|---|---|
| Solid colour epoxy | $5 – $8 per square foot, estimated |
| Metallic epoxy | $8 – $15 per square foot, estimated |
| Two-car garage | From about $2,500 |
| On-site measurement | Free, no deposit |
| Typical residential garage | One day; walk on it the next day, park after 48–72 h |
We measure on site before we quote. There is no charge to get a number.
Get a free on-site estimateCommercial floors installed in sections and after hours, so the building stays open.
Curing times planned for the season, including the colder winter months.
Published price ranges by system before the first visit.
A bilingual crew, in English and Spanish.
Tallahassee neighborhoods
Also across the Big Bend
Yes. Cold temperatures slow the cure, so we plan the schedule, the heating of the space if needed and the time until the floor can be used, and we put it in the quote.
Polished concrete if the slab is in good condition, or a solid color epoxy for a uniform, easy-to-clean floor. Solid color runs about $5 to $8 per square foot, estimated.
Yes. We work in sections and after business hours, so each area is usable the next morning.
Yes. We work across Florida from our base in Weston and schedule Tallahassee jobs in advance.
Send the address, the approximate square footage and what the space is used for. We give you a range first and a written quote after the visit.
