The short answer
Most epoxy floors in Florida run $5 to $15 per square foot installed, depending on the system; a standard two-car garage starts around $2,500. A solid color floor is the lowest range, about $5 to $8 per square foot. Flake floors, the most common choice for garages, run about $6 to $10. Metallic floors, the most decorative, run about $8 to $15. Commercial and warehouse floors run about $5 to $12 depending on the system, and pool decks and other exterior surfaces about $6 to $14. Every figure on this page is a market estimate, not a fixed rate: the final price depends on the size of the area, the condition of the concrete, the preparation it needs, moisture in the slab, repairs, the system you choose and access to the space. That is why every job starts with a visit and a written quote.
Epoxy flooring cost by system
Estimated ranges per square foot installed, as of September 2026. Each system links to its own page with photos of floors we installed.
| System | Estimated range | Best for |
|---|---|---|
| Solid color epoxy | $5 – $8 / sq ft | Garages, laundry rooms, storage, simple commercial floors |
| Flake epoxy | $6 – $10 / sq ft | Garages, patios, entries; hides dirt and adds grip |
| Metallic epoxy | $8 – $15 / sq ft | Living rooms, receptions, showrooms, gyms |
| Quartz system | $9 – $14 / sq ft | Commercial kitchens, labs, wet areas that need grip |
| Urethane cement | $9 – $15 / sq ft | Kitchens and industrial areas with heat, chemicals and washdowns |
| Commercial floors and warehouses | $5 – $12 / sq ft | Warehouses, stores, workshops; depends on the system |
| Pool decks and exterior surfaces | $6 – $14 / sq ft | Pool decks, patios, walkways in full sun |
| Polished concrete | $3 – $12 / sq ft | Warehouses, restaurants, stores; depends on sheen and aggregate |
| Terrazzo restoration | $5 – $12 / sq ft | Original terrazzo in older homes and buildings |
| Marble polishing and restoration | Quote after inspection | Dull or scratched marble; priced after inspection |
What you get in each price range
The range is not arbitrary: it follows how many layers a system has, how much handwork it takes and what it has to withstand.
Solid color epoxy: $5 to $8
A primer, a pigmented epoxy body coat and a topcoat. It is the simplest system and the lowest range. It gives a clean, uniform floor that is easy to sweep and mop, and it suits garages, laundry rooms, storage rooms and back-of-house areas where function matters more than design.
Flake epoxy: $6 to $10
The same base, with vinyl flakes broadcast into the wet resin and sealed under a clear topcoat. The flakes hide dust, tire marks and small imperfections in the slab, and the texture gives more grip than a smooth floor. That is why it is the most common choice for garages, patios and entries.
Metallic epoxy: $8 to $15
Metallic pigments are worked by hand while the resin is still liquid, so the pattern is made on the day and no two floors are the same. More layers and more handwork put it at the top of the resin systems. It is an interior floor for living rooms, receptions, showrooms and gyms.
Quartz and urethane cement: $9 to $15
These are heavy-duty systems for commercial kitchens, labs and industrial areas. Quartz adds colored quartz granules for grip in wet areas; urethane cement handles heat, chemicals and constant washdowns. They cost more because they are thicker and are built for conditions that would wear out a standard floor.
Polished concrete: $3 to $12
No coating: we grind and polish the slab itself. The range is wide because it depends on how much of the stone inside the concrete you want to see and how much shine you want. A light polish with little exposure sits at the low end; exposed aggregate at high gloss, with more passes, sits at the high end.
Terrazzo restoration: $5 to $12
Grinding, patching and re-polishing original terrazzo, common in older Florida homes and buildings. The price depends on the stains, cracks, holes and repairs the floor has. Marble is quoted only after an inspection, because the condition of the floor, the shine you want and the repairs change too much from one job to another to publish a range.
Cost by space
The system sets the range; the space decides where in that range a job lands.
Two-car garage
A standard two-car garage starts around $2,500. Most garages get a flake system, which runs about $6 to $10 per square foot and hides dirt, tire marks and small imperfections. It is normally done in one working day: you can walk on it the next day, and vehicles usually go back in after 48 to 72 hours, depending on the system, product, temperature and humidity.
Patio, entry and pool deck
Exterior surfaces run about $6 to $14 per square foot. Outside, the choice of system matters more than anywhere else: the floor has to handle full sun, rain and bare feet, so it needs a UV-stable finish and, around a pool, a texture that gives grip when wet.
Warehouse, store or commercial floor
Commercial and warehouse floors run about $5 to $12 per square foot depending on the system. A large, open area usually lowers the price per square foot; forklift traffic, chemicals, heat or constant washdowns call for heavier systems such as quartz ($9 to $14) or urethane cement ($9 to $15).
Estimate your floor
Enter the square footage and choose a system. The result multiplies your area by the estimated range for that system. It is a starting point for planning, not a quote.
Estimated ranges for common floor sizes
| System | 500 sq ft | 1,000 sq ft | 2,500 sq ft |
|---|---|---|---|
| Solid color epoxy | $2,500 – $4,000 | $5,000 – $8,000 | $12,500 – $20,000 |
| Flake epoxy | $3,000 – $5,000 | $6,000 – $10,000 | $15,000 – $25,000 |
| Metallic epoxy | $4,000 – $7,500 | $8,000 – $15,000 | $20,000 – $37,500 |
| Commercial floors and warehouses | $2,500 – $6,000 | $5,000 – $12,000 | $12,500 – $30,000 |
| Polished concrete | $1,500 – $6,000 | $3,000 – $12,000 | $7,500 – $30,000 |
Estimate, not a quote. The final price requires an on-site evaluation. For a standard two-car garage, the reference is from about $2,500.
What moves the price
Two floors of the same size can be quoted very differently. These are the variables that decide it:
- The size of the area. Larger areas usually lower the price per square foot.
- The condition of the concrete: cracks, pits, old coatings, paint or glue that have to come off.
- Preparation. Every system we install starts with diamond grinding; a slab in poor condition needs more of it.
- Moisture in the slab, which can call for a moisture test and a special primer.
- Repairs to cracks, joints and damaged areas.
- The system you choose and its finish.
- Access to the space: stairs, tight entries, occupied areas or work outside normal hours.
Moisture in Florida slabs
Moisture is the variable people least expect. Concrete is porous, and in Florida, with a high water table and humid air, moisture can rise through a slab on grade. If it is not controlled, it pushes against the coating from below and can make it lose its bond. That is why we measure moisture before quoting. When it is high, the floor needs a moisture-control primer, which adds to the price but protects everything laid on top of it.
Sun on exterior floors
Standard epoxy can amber over time in UV light. On patios, pool decks and garages with the door open to the sun, the floor needs a UV-stable topcoat or a system made for exteriors. It costs more than an interior finish, and it is what keeps the floor from yellowing.
How long installation takes
Time on site is part of the cost, and it is also what most people need to plan around. A standard two-car garage is normally done in one working day. You can walk on it the next day, and vehicles usually go back in after 48 to 72 hours, depending on the system, product, temperature and humidity.
Larger areas, heavy repairs, a moisture-control primer or systems with more layers, such as metallic or quartz, take longer. The quote tells you how many days the job takes and when each part of the floor can be used, so you can plan around it before anything is scheduled.
Ways to keep the cost down without cutting corners
Some savings are real; others just move the cost to a repair a year later. These are the ones that hold up:
- Choose the system for the use, not for the photo. A flake floor in a garage does the same job as a metallic one for less.
- Do several areas at once. A garage and a patio in the same visit share preparation and travel.
- Clear the space before the crew arrives. Time spent moving boxes, shelves or equipment is time on the job.
- Fix water problems first. A leak, a downspout draining onto the slab or standing water will damage any floor, whatever it cost.
- Do not skip preparation. It is the part of the job you cannot see, and it is what decides whether the floor lasts.
DIY kit vs professional installation
A store-bought kit costs less upfront, and that is its real advantage. The difference is in what the kit does not include: diamond grinding of the slab, repair of cracks and joints, a moisture test and a professional-grade system. Most failures of epoxy floors, such as peeling, bubbles or hot tire pickup, come from poor preparation, not from the resin.
If the floor is a small area with a slab in good condition, a kit can be a reasonable choice. If it is a garage you want to last, a large area or a slab with moisture or damage, the preparation is what you are paying for.
Read the full comparison: garage floor kit vs professionalHow to compare epoxy flooring quotes
When two quotes are far apart, they usually describe different floors. Before comparing the totals, check that each one says:
- How the concrete will be prepared: diamond grinding or only acid etching.
- Which system and how many coats, including the topcoat.
- The brand and type of product. We work with professional-grade products from manufacturers such as Sika, Tremco/Vulkem, Ardex and Dur-A-Flex.
- Whether repairs to cracks, joints and damaged areas are included, or quoted apart.
- Whether the moisture of the slab will be measured.
- When you can walk on the floor and when vehicles can go back in.
- What the warranty covers. Ours is available according to the installed system and the terms set in the contract.
Is epoxy flooring worth it?
A well-installed system lasts about 10 to 15 years with proper care and maintenance. How long it lasts depends on use, traffic, sun exposure, moisture, the condition of the concrete and maintenance. Spread over that time, a floor that resists stains, is easy to clean and does not need repainting every year is usually a good investment, especially in a garage or a commercial space.
How long does epoxy flooring last, and what shortens itQuestions about epoxy flooring cost
How much does it cost to epoxy a two-car garage in Florida?
A standard two-car garage starts around $2,500. The final price depends on the condition of the slab, the repairs it needs, moisture and the system you choose.
Is epoxy flooring priced per square foot or per project?
Both. The price is built per square foot for each system, but the quote is for the whole project, because preparation, repairs and access do not scale evenly with the area.
Why do epoxy quotes vary so much?
Because they often describe different floors. Check how the slab will be prepared, which system and how many coats, whether repairs are included and whether moisture will be measured.
Does the price include repairs to the concrete?
Minor preparation is part of every job. Cracks, damaged joints and larger repairs depend on the slab, so we see them on site and list them in the quote.
How long does an epoxy floor last?
About 10 to 15 years with proper care and maintenance, depending on use, traffic, sun exposure, moisture, the condition of the concrete and maintenance.
Is the estimate on this page binding?
No. The ranges and the calculator are market estimates for planning. The final price requires an on-site evaluation and a written quote.
Methodology and sources
The ranges on this page were provided by Freily Services Group LLC in September 2026 as approximate market prices in Florida. They are estimates, not fixed rates: the final price requires a prior evaluation and a quote.
The calculator multiplies the area you enter by the estimated range for the system you choose. It does not add repairs, moisture control or access, which are only known after a visit. We review these ranges when prices change and update the date at the top of the page.
