4.9

30 Google reviews

SourceGoogle

2020

Registered in Florida

DocumentL20000065481

EN / ES

We work in two languages

CoverageWeston, Florida

Garages, workshops and warehouses in Ocala

Flake garage floors run about $6 to $10 per square foot, commercial and warehouse floors $5 to $12, polished concrete $3 to $12, and a standard two-car garage starts around $2,500, all estimated. Ocala and Marion County are horse country, and many properties here are large, with detached garages, workshops and equipment buildings that get used hard. Those floors need a system that handles tools, oil, tires and equipment, and a flake or solid color epoxy over ground concrete does that well. The I-75 corridor has also brought distribution centers and industrial buildings, where polished concrete or a commercial coating and clearly marked lanes keep the operation moving. Inland, there is less salt air than on the coast, but cooler winter days slow curing, so we plan the return to service with the season in mind. Every job starts with grinding, repairs and a moisture test.

What Ocala floors usually need

Flake and solid color systems for garages and workshops, polished concrete, commercial coatings and line marking for warehouses, and sealers for exterior slabs.

Residential garage floor coated with black, white and grey epoxy flakes, photographed at floor level

Epoxy Flake Flooring

Vinyl flakes broadcast into the wet resin, then sealed. Hides dust and tire marks better than any solid color — the usual pick for garages. A heavier broadcast gives a full, granite-like texture with more grip, which is what holds up around pools and service areas.

Open commercial hall with white columns over a mirror-black high-gloss epoxy floor

Solid Color Epoxy

One uniform color, high gloss, no pattern. The cleanest look for showrooms, corridors and any space where the floor should stay quiet.

Freshly polished concrete floor in a pizza restaurant, high-gloss grey slab reflecting the ceiling lights, red walls and a white tile counter

Concrete Polishing

Mechanically refining the slab you already have through progressive diamond grits. No coating on top — the finish is the concrete itself.

Illustrative image: two technicians rolling yellow safety lines and a striped walkway onto a grey epoxy warehouse floorIllustrative image

Floor Line Marking & Striping

Safety lanes, walkways, parking stalls and work zones marked in epoxy or traffic coating for warehouses, shops and garages — straight, masked lines built to take forklifts and cars.

Large commercial floor being machine-polished, a worker visible in the distance

Concrete Sealing

A penetrating or film-forming sealer against oil, salt and water. The cheapest thing you can do to make a slab last longer.

Industrial warehouse with loading docks and a continuous grey resin floor running the full length

Quartz Epoxy Flooring

Colored quartz aggregate in a resin matrix. The toughest decorative option we install — built for kitchens, labs and wash-down areas.

Services

$6 – $10

per square foot installed, most flake floors

What an epoxy floor costs in Florida

A standard two-car garage starts around $2,500. Solid colour runs $5 to $8 and metallic $8 to $15 per square foot. These are market estimates, not fixed rates: slab condition, preparation, moisture, repairs, the system and access decide the final number — and we would rather you know the range before you call than after.

What moves the number

  • The condition of the slab: cracks, old coating, moisture
  • The size of the area: a two-car garage costs more per foot than a warehouse
  • The system you pick: flake and metallic are not priced the same
  • How much preparation the surface needs before anything goes down

The numbers, side by side

Flake epoxy (garages, patios)$6 – $10 per square foot, estimated
Solid colour epoxy$5 – $8 per square foot, estimated
Metallic epoxy$8 – $15 per square foot, estimated
Two-car garageFrom about $2,500
On-site measurementFree, no deposit
Typical residential garageOne day; walk on it the next day, park after 48–72 h

We measure on site before we quote. There is no charge to get a number.

Get a free on-site estimate

Why Ocala owners call us

Garage and workshop floors built for tools, oil and equipment, not just cars.

Warehouse floors coated or polished and striped on the same job.

Curing times planned for the season.

Published price ranges by system and a bilingual crew.

Where we work around Ocala

Ocala areas

  • Downtown Ocala
  • Ocala Historic District
  • Silver Springs Shores
  • Golden Hills
  • Country Club of Ocala
  • Fore Ranch

Also across Marion County

  • Belleview
  • Dunnellon
  • Silver Springs
  • Summerfield
  • Reddick
  • The Villages

Questions Ocala owners ask

What floor works in a workshop or equipment building?

A flake or solid color epoxy over diamond-ground concrete, with a topcoat that resists oil and chemicals. Flake runs about $6 to $10 per square foot and solid color $5 to $8, estimated.

Polished concrete or a coating for a warehouse?

If the slab is in good condition, polished concrete gives a durable floor with nothing on top to peel. If it is damaged or needs chemical resistance, a coating is the better choice.

Can you install in winter?

Yes. Cooler temperatures slow the cure, so we plan the schedule and the time until you can use the floor with that in mind and put it in the quote.

Do you come to Ocala from South Florida?

Yes. We work across Florida from our base in Weston and schedule Ocala jobs in advance.

Tell us about the floor in Ocala

Send the address, the size of the building and what it is used for. We give you a range first and a written quote after the visit.