4.9

30 Google reviews

SourceGoogle

2020

Registered in Florida

DocumentL20000065481

EN / ES

We work in two languages

CoverageWeston, Florida

Floors for Space Coast shops, labs and homes

Commercial floors run about $5 to $12 per square foot, quartz systems $9 to $14, flake garage floors $6 to $10, and a standard two-car garage starts around $2,500, all estimated. Melbourne sits on the Space Coast, and a good part of its economy is aerospace, defense and technology manufacturing. Those buildings want floors that are clean, easy to maintain, resistant to chemicals and, in production areas, clearly marked. A solid color or quartz system with a chemical-resistant topcoat is often the answer, with lanes and work zones striped on the same job. On the residential side, homes from the mainland to the beachside take strong sun and salt air, so pool decks and patios need UV-stable finishes with grip, and garage slabs near the coast get a moisture test before anything goes on. We work across Florida from our base in Weston.

What Melbourne floors usually need

Solid color and quartz systems for shops, labs and production areas, polished concrete and line marking for warehouses, flake systems for garages and UV-stable pool deck coatings.

Open commercial hall with white columns over a mirror-black high-gloss epoxy floor

Solid Color Epoxy

One uniform color, high gloss, no pattern. The cleanest look for showrooms, corridors and any space where the floor should stay quiet.

Residential garage floor coated with black, white and grey epoxy flakes, photographed at floor level

Epoxy Flake Flooring

Vinyl flakes broadcast into the wet resin, then sealed. Hides dust and tire marks better than any solid color — the usual pick for garages. A heavier broadcast gives a full, granite-like texture with more grip, which is what holds up around pools and service areas.

Industrial warehouse with loading docks and a continuous grey resin floor running the full length

Quartz Epoxy Flooring

Colored quartz aggregate in a resin matrix. The toughest decorative option we install — built for kitchens, labs and wash-down areas.

Freshly polished concrete floor in a pizza restaurant, high-gloss grey slab reflecting the ceiling lights, red walls and a white tile counter

Concrete Polishing

Mechanically refining the slab you already have through progressive diamond grits. No coating on top — the finish is the concrete itself.

Large light grey coated rooftop deck photographed at night with perimeter railings

Pool Deck Coating

A textured coating for the concrete around a pool: cooler underfoot than bare slab, grippy when wet, and sealed against chlorine and sun.

Illustrative image: two technicians rolling yellow safety lines and a striped walkway onto a grey epoxy warehouse floorIllustrative image

Floor Line Marking & Striping

Safety lanes, walkways, parking stalls and work zones marked in epoxy or traffic coating for warehouses, shops and garages — straight, masked lines built to take forklifts and cars.

Services

$6 – $10

per square foot installed, most flake floors

What an epoxy floor costs in Florida

A standard two-car garage starts around $2,500. Solid colour runs $5 to $8 and metallic $8 to $15 per square foot. These are market estimates, not fixed rates: slab condition, preparation, moisture, repairs, the system and access decide the final number — and we would rather you know the range before you call than after.

What moves the number

  • The condition of the slab: cracks, old coating, moisture
  • The size of the area: a two-car garage costs more per foot than a warehouse
  • The system you pick: flake and metallic are not priced the same
  • How much preparation the surface needs before anything goes down

The numbers, side by side

Flake epoxy (garages, patios)$6 – $10 per square foot, estimated
Solid colour epoxy$5 – $8 per square foot, estimated
Metallic epoxy$8 – $15 per square foot, estimated
Two-car garageFrom about $2,500
On-site measurementFree, no deposit
Typical residential garageOne day; walk on it the next day, park after 48–72 h

We measure on site before we quote. There is no charge to get a number.

Get a free on-site estimate

Why Melbourne owners call us

Commercial systems chosen for chemicals, cleaning and traffic, not just for looks.

Floors coated and striped on the same job, in sections, outside production hours.

Published price ranges by system before the first visit.

A bilingual crew, in English and Spanish.

Where we work around Melbourne

Melbourne areas

  • Downtown Melbourne
  • Eau Gallie
  • Suntree
  • Lake Washington
  • Melbourne Beach area
  • Wickham

Also across Brevard County

  • Palm Bay
  • West Melbourne
  • Viera
  • Satellite Beach
  • Indialantic
  • Cocoa Beach

Questions Melbourne owners ask

What floor works in a production area or lab?

Usually a solid color or quartz system with a chemical-resistant topcoat, chosen for the chemicals, the cleaning and the traffic. Quartz systems run about $9 to $14 per square foot, estimated.

Can you mark lanes and work zones at the same time?

Yes. Lanes, walkways and work zones can be marked as the last step of the same job, so the floor goes back into use ready.

Does salt air affect a pool deck near the beach?

It affects the concrete and the finish, which is why exterior surfaces near the coast get a UV-stable, slip-resistant system and a moisture check. They run about $6 to $14 per square foot, estimated.

Do you come to Melbourne from South Florida?

Yes. We work across Florida from our base in Weston and schedule Brevard jobs in advance.

Tell us about the floor in Melbourne

Send the address, the square footage and what the space is used for. We give you a range first and a written quote after the visit.