Service area · Jacksonville, FL
Garage floors, warehouse coatings, polished concrete and line marking for homes and businesses across Jacksonville and Northeast Florida.
A standard two-car garage starts around $2,500, flake floors run about $6 to $10 per square foot, commercial and warehouse floors $5 to $12 and polished concrete $3 to $12, all estimated. Jacksonville is the largest city by area in the continental United States, and the work here is spread out: older homes in Riverside, Avondale and San Marco, newer garages in Mandarin and the Southside, and a large logistics base around the port and the interstates, with warehouses and distribution centers that need tough floors and marked lanes. Northeast Florida also has cooler winters than the south of the state. Temperature is one of the variables that decide how fast a coating cures, so in the cold months we plan the schedule and the return to service with that in mind and tell you in the quote. Every job starts with diamond grinding, repairs and a moisture test.
Flake systems for garages, solid color and quartz for shops and kitchens, polished concrete and line marking for warehouses, and sealers for driveways and walkways.
Vinyl flakes broadcast into the wet resin, then sealed. Hides dust and tire marks better than any solid color — the usual pick for garages. A heavier broadcast gives a full, granite-like texture with more grip, which is what holds up around pools and service areas.
One uniform color, high gloss, no pattern. The cleanest look for showrooms, corridors and any space where the floor should stay quiet.
Colored quartz aggregate in a resin matrix. The toughest decorative option we install — built for kitchens, labs and wash-down areas.
Mechanically refining the slab you already have through progressive diamond grits. No coating on top — the finish is the concrete itself.
Illustrative imageSafety lanes, walkways, parking stalls and work zones marked in epoxy or traffic coating for warehouses, shops and garages — straight, masked lines built to take forklifts and cars.
A penetrating or film-forming sealer against oil, salt and water. The cheapest thing you can do to make a slab last longer.
$6 – $10
per square foot installed, most flake floors
A standard two-car garage starts around $2,500. Solid colour runs $5 to $8 and metallic $8 to $15 per square foot. These are market estimates, not fixed rates: slab condition, preparation, moisture, repairs, the system and access decide the final number — and we would rather you know the range before you call than after.
What moves the number
The numbers, side by side
| Flake epoxy (garages, patios) | $6 – $10 per square foot, estimated |
|---|---|
| Solid colour epoxy | $5 – $8 per square foot, estimated |
| Metallic epoxy | $8 – $15 per square foot, estimated |
| Two-car garage | From about $2,500 |
| On-site measurement | Free, no deposit |
| Typical residential garage | One day; walk on it the next day, park after 48–72 h |
We measure on site before we quote. There is no charge to get a number.
Get a free on-site estimatePublished price ranges by system before anyone visits.
Warehouse floors coated and striped on the same job, in sections, so operations keep moving.
Curing times planned for the season, including the cooler winter months.
A bilingual crew, in English and Spanish.
Jacksonville neighborhoods
Also across Northeast Florida
Commercial and warehouse floors run about $5 to $12 per square foot, estimated, depending on the system, the condition of the slab and the site. Line marking can be added to the same job.
Yes. Cold temperatures slow the cure, so we plan the schedule and the time until you can walk on it or drive on it with the season in mind, and we put it in the quote.
You can usually walk on it the next day, and vehicles usually go back in after 48 to 72 hours, depending on the system, product, temperature and humidity.
Yes. We work across Florida from our base in Weston, and we schedule Jacksonville jobs in advance so the crew arrives with the complete system.
Send the address, the approximate square footage and what the space is used for. We give you a range first and a written quote after the visit.
