Service area · Gainesville, FL
Floors for labs, clinics and restaurants, polished concrete and garage floors for businesses and homes across Gainesville and Alachua County.
Quartz systems run about $9 to $14 per square foot, commercial floors $5 to $12, polished concrete $3 to $12, flake garage floors $6 to $10, and a standard two-car garage starts around $2,500, all estimated. Gainesville is a university and health care city, and many of the floors here have strict jobs: labs and clinics that need a seamless surface that stands up to chemicals and frequent disinfection, and restaurants and food spaces that are wet, greasy and cleaned every night. Quartz and solid color systems with a chemical-resistant topcoat are the usual answer in those spaces, with a textured finish where the floor gets wet. Offices and shops often get polished concrete, and homes from Haile Plantation to the Duckpond bring garages. Winters are cooler than in South Florida, so we plan curing with the season in mind, and every job starts with grinding, repairs and a moisture test.
Quartz and solid color systems for labs, clinics and kitchens, polished concrete for offices and shops, flake systems for garages and sealers for exterior slabs.
Colored quartz aggregate in a resin matrix. The toughest decorative option we install — built for kitchens, labs and wash-down areas.
One uniform color, high gloss, no pattern. The cleanest look for showrooms, corridors and any space where the floor should stay quiet.
Mechanically refining the slab you already have through progressive diamond grits. No coating on top — the finish is the concrete itself.
Vinyl flakes broadcast into the wet resin, then sealed. Hides dust and tire marks better than any solid color — the usual pick for garages. A heavier broadcast gives a full, granite-like texture with more grip, which is what holds up around pools and service areas.
A urethane topcoat over epoxy for UV stability and chemical resistance. What keeps a floor from yellowing where sunlight reaches it.
A penetrating or film-forming sealer against oil, salt and water. The cheapest thing you can do to make a slab last longer.
$6 – $10
per square foot installed, most flake floors
A standard two-car garage starts around $2,500. Solid colour runs $5 to $8 and metallic $8 to $15 per square foot. These are market estimates, not fixed rates: slab condition, preparation, moisture, repairs, the system and access decide the final number — and we would rather you know the range before you call than after.
What moves the number
The numbers, side by side
| Flake epoxy (garages, patios) | $6 – $10 per square foot, estimated |
|---|---|
| Solid colour epoxy | $5 – $8 per square foot, estimated |
| Metallic epoxy | $8 – $15 per square foot, estimated |
| Two-car garage | From about $2,500 |
| On-site measurement | Free, no deposit |
| Typical residential garage | One day; walk on it the next day, park after 48–72 h |
We measure on site before we quote. There is no charge to get a number.
Get a free on-site estimateSeamless, chemical-resistant systems for spaces that are disinfected often.
Commercial floors installed in sections and after hours.
Published price ranges by system before the first visit.
A bilingual crew, in English and Spanish.
Gainesville neighborhoods
Also across Alachua County
A seamless quartz or solid color system with a chemical-resistant topcoat, chosen for the chemicals and the cleaning products used. Quartz runs about $9 to $14 per square foot, estimated.
Usually a quartz system or urethane cement with a textured finish, because the floor is wet and greasy and gets hot water. We cover the options in our article on commercial kitchen floors.
Yes. We work in sections and outside business hours, and tell you when each area can be used before anything is scheduled.
Yes. We work across Florida from our base in Weston and schedule Gainesville jobs in advance.
Send the address, the square footage and what the space is used for. We give you a range first and a written quote after the visit.
